PBL-20|PBL 系列|油扩散泵|真空泵(高真空)|产品中心|ULVAC SHOWCASE

油扩散泵

PBL 系列

PBL-20

アルバック

ULVAC的PBL型油扩散喷射泵、是在中真空领域可以提高排气速度的扩散泵。有效对应异物混入,从发售开始一直畅销至今。

特点

  • 10-1Pa排气速度最大。
  • PBL-02~PBL-04型使用不锈钢作为主体(气缸)。 因此。出气少,容易获得高真空,并且耐腐蚀性优异。
  • 与水平喷射泵相比,操作范围向低压侧移动约一位数,但同口径的泵排气速度要大得多,并且排气速度特性也很好。 可在油回转真空泵,机械增压泵和油扩散泵的中间压力下使用,并且安装面积小。
  • 大型泵PBL-06~PBL-20管式加热器直接包含在液压流体中,因此热效率特别高。

规格

Model PBL-02 PBL-04 PBL-06 PBL-10 PBL-14 PBL-20
Pumping speed(L/sec) 80 200 500 1800 4000 7000
Ultimate pressure(Pa)*1 2.7×10-2
Maxium forepressure(Pa) 40
Heating up time(min) 20 30 30 40 50 60
Oil ULVOIL B-6
Oil capacity(L) 0.1 0.6 7.5 18 36 90
Cooling water temperature(℃) 19~25℃
Water connections Rc 1/8×1 Rc 1/4×1 Rc 3/8×2 Rc 1/2×2 Rc 1/2×3 Rc 1/2×3
Rc 3/8×1
Water capacity(L/min) 1.5 5 8 12 18 25
Voltage 200V / 1φ 200V / 3φ
Pump power(kW) 0.44 1.8 4
2kW×2pc.
8
4kW×2pc.
11
5.5kW×2pc.
18
6kW×3pc.
Heater type cartridge colled element sheathed sheathed sheathed sheathed
Standard backing pump*2 VD201/VD30C
PVD-360
PKS-016
VS1501
PKS-030
VS2401
PKS-070
(PMB600D+PKS-030)
(PMB600D+VS1501)
PMB1200D+PKS-030
PMB1200D+VS1501
PMB-040C+PKS-070
(PMB2400D+PKS-070)
Dimensions(mm)*3 A 100 150 200 300 340 510
B 70 112 152 346 548 422
H 463 524 973 1321 1687 2320
Inlet VG50 VG100 VG150 VG250 VG350 VG500
Outlet 3/4B hose fittings VG40 VG50 VG80 VG100 VG200
Weight(kg) 6 17 86 198 313 495
Oil level gage without without dip stick dip stick dip stick dip stick
Themal switch option witout witout witout witout witout witout
Themal switch operating temperature(℃) - - - - - -

Water Cooling Baffle(PBL)

Model BW-02 BW-04B BW-06B BW-10 BW-14 BW-20
Conductance [L/sec] 100 940 2200 3130 5000 13000
Dimensions [mm]*3 D φ120 φ149 φ199 φ350 φ450 φ625
T 16 28 28 44 50 152
t 16 25 25 22 22 24
Water connections Rc 1/8 Rc 1/4 Rc 1/4 Rc 1/4 Rc 3/8 Rc 3/8
Water capacity
[L/min]
1.5 0.7 1 2 2 3
Weight [kg] 1 1.3 1.7 7.6 11 22

*1 The ultimate pressure by an ionization gauge in the case of coolant temperature 20 degrees Ceisius.
*2 The backing pump chooses it for the maximum throughput of the diffusion ejector pump,but,in consideration of time of starting pressure,it is good to use a big backing pump.
*3 Please confirm other dimensions by CAD data placing in the ULVAC,Inc.website.

該非判定結果報告書 Download

SDS Download

This website use cookies to obtain and use access data to understand the convenience and usage of customers. If you agree to use cookies, click "I Accept".
[Privacy Plicy] [Cookie Policy]

I Accept