选购配件・消耗品

显示器单元

ISG1(日本产) / ISG1-N(中国产)

アルバック

该显示器是G-TRAN全系列真空计和CCM系列的单通道显示器。
通过与测量单元连接,可以轻松设置压力显示、压力接点并进行各种操作,工作状况一目了然。可以通过显示单元进行远程的控制和测量。

特点

  • 可对应所有G-TRAN系列和CCM系列
  • 控制输出信号:可以输出3个设定点
  • 电源电压:24 VDC(使用可选的AC适配器,可在100到240 AC下工作)
  • 测量值输出信号:压力标准配有0至10 V线性输出
  • 通信规格:标准配有RS485通信
  • 显示部分是可视性更强的LED
  • 有紧凑型DIN规格48×96mm
  • 符合CE

用途

  • 使用大量真空计的制造设备
    (太阳能电池・FPD・半导体・电子部件制造设备)
  • 需要许多设定点的设备

规格

Model ISG1
Connectable sensor units 1 unit
Compatible sensor unit G-TRAN Series

Atmospheric range pirani gauge SW1 Pirani gauge SP1 / BPR2 Hot cathode gauge BMR2 Cold cathode gauge SC1 Multi ionization gauge SH2 Ceramic capacitance manometer CCMT-D
Display Significand: 2 digit, Exponent: 1 digit digital □.□×10□
Scale Pa
Range Depends on each sensor unit's pressure range
Update time 200ms
Accuracy ±2%±1 digit respect to pressure value from measurement unit (CCM series:±4% digit at below 1/10 of full scale)
Data output DC 0 to 10V simulatied Log output, Log, linear output *Note: Output differs among each unit
Update time 70ms
Resolution 1mV
Accuracy ±10mV respect to pressure value converted to voltage
Sampling time 70ms running average in 5 times
Control input signal Open collector input, negative logic
Filament lighting signal, Atmosphere pressure adjustment etc.
Set point 1, 2, 3
Control output signal Open collector output, Negative logic [[rating: 30VMAX、50mAWAX、70mW]
Error signal, Filament lighting signal etc.
Set point 1, 2, 3
Serial communication type RS-485
LED display ERROR SET-1
DEG SET-2
ZERO SET-3
Power voltage DC24V±1V Ripple, noise less than 1%
Current consumption 2W (Display unit only) *other connected unit's consumption will be added
Input/output connector Sensor connector: D-sub15-socket (M2.6 screw)
I/O connector: D-sub15-pin (M2.6 screw)
Power supply connector: PHOENIX: MSTB 2, 5/3-STF, 08
Operating temperature range 10 to 40˚C (50 to 104˚F)
Operating humidity range 15 to 80% (not condensing)
Weight 250g
Dimension W×D×H DIN 48mm×70mm×96mm (JIS rack size 50mm×70mm×100mm is also available)
Accessories Power supply connector: PHOENIX: MSTB 2, 5/3-STF-5, 08 1pc
DIN panel fixture: Fixture brackets 2pc
Instruction manual: Standard paper 1pc
Option Sensor connectors: D-sub15-pin (M2.6 screw) 1pc
I/O connector: D-sub15-socket (M2.6 screw) 1pc
Applicable standard CE

該非判定結果報告書 Download

SDS Download

可选部件・消耗品

咨询该产品相关问题

This website use cookies to obtain and use access data to understand the convenience and usage of customers. If you agree to use cookies, click "I Accept".
[Privacy Plicy] [Cookie Policy]

I Accept