“Model:G-TRAN”通用显示单元
选购配件・消耗品 Model:ISG1(日本产) / ISG1-N(中国产)
ULVAC
打印・
保存产品手册
保存产品手册
关于Model:ISG1(日本产) / ISG1-N(中国产)的介绍、购买、商讨
该显示器是"Model:G-TRAN"全真空计和"Model:CCM"的单通道显示器。
通过与测量单元连接，可以轻松设置压力显示、压力接点并进行各种操作，工作状况一目了然。可以通过显示单元进行远程的控制和测量。
通过与测量单元连接，可以轻松设置压力显示、压力接点并进行各种操作，工作状况一目了然。可以通过显示单元进行远程的控制和测量。
特点
- 可对应所有“Model:G-TRAN”和“Model:CCM”
- 控制输出信号：可以输出3个设定点
- 电源电压：24 VDC（使用可选的AC适配器，可在100到240 AC下工作）
- 测量值输出信号：压力标准配有0至10 V线性输出
- 通信规格：标准配有RS485通信
- 显示部分是可视性更强的LED
- 有紧凑型DIN规格48×96ｍｍ
- 符合CE
用途
- 使用大量真空计的制造设备
（太阳能电池・FPD・半导体・电子部件制造设备） - 需要许多设定点的设备
规格
| Model | ISG1 | ||
| Connectable sensor units | 1 unit | ||
| Compatible sensor unit | G-TRAN Series Atmospheric range pirani gauge SW1 Pirani gauge SP1 / BPR2 Hot cathode gauge BMR2 Cold cathode gauge SC1 Multi ionization gauge SH2 Ceramic capacitance manometer CCMT-D |
||
| Display | Significand: 2 digit, Exponent: 1 digit digital □.□×10□ | ||
| Scale | Pa | ||
| Range | Depends on each sensor unit's pressure range | ||
| Update time | 200ms | ||
| Accuracy | ±2%±1 digit respect to pressure value from measurement unit (CCM series:±4% digit at below 1/10 of full scale) | ||
| Data output | DC 0 to 10V simulatied Log output, Log, linear output ＊Note: Output differs among each unit | ||
| Update time | 70ms | ||
| Resolution | 1mV | ||
| Accuracy | ±10mV respect to pressure value converted to voltage | ||
| Sampling time | 70ms running average in 5 times | ||
| Control input signal | Open collector input, negative logic | ||
| Filament lighting signal, Atmosphere pressure adjustment etc. | |||
| Set point 1, 2, 3 | |||
| Control output signal | Open collector output, Negative logic [[rating: 30VMAX、50mAWAX、70mW] | ||
| Error signal, Filament lighting signal etc. | |||
| Set point 1, 2, 3 | |||
| Serial communication type | RS-485 | ||
| LED display | ERROR | SET-1 | |
| DEG | SET-2 | ||
| ZERO | SET-3 | ||
| Power voltage | DC24V±1V Ripple, noise less than 1% | ||
| Current consumption | 2W (Display unit only) ＊other connected unit's consumption will be added | ||
| Input/output connector | Sensor connector: D-sub15-socket (M2.6 screw) | ||
| I/O connector: D-sub15-pin (M2.6 screw) | |||
| Power supply connector: PHOENIX: MSTB 2, 5/3-STF, 08 | |||
| Operating temperature range | 10 to 40˚C (50 to 104˚F) | ||
| Operating humidity range | 15 to 80% (not condensing) | ||
| Weight | 250g | ||
| Dimension W×D×H | DIN 48mm×70mm×96mm (JIS rack size 50mm×70mm×100mm is also available) | ||
| Accessories | Power supply connector: PHOENIX: MSTB 2, 5/3-STF-5, 08 1pc | ||
| DIN panel fixture: Fixture brackets 2pc | |||
| Instruction manual: Standard paper 1pc | |||
| Option | Sensor connectors: D-sub15-pin (M2.6 screw) 1pc | ||
| I/O connector: D-sub15-socket (M2.6 screw) 1pc | |||
| Applicable standard | CE | ||
