Print/Download
Thermal Conductivity Measurement System
Thermal Diffusivity measurement system by Xe flash method
TD-1 series
アルバック販売
Capable of evaluation of heat radiation film in the thickness direction and anisotropy.
The most suitable system for the evaluations of heat dissipation films etc. By using Xenon lamp, it enables to minimize the damage to the sample. Sample anisotropy can also easily measure by using the original attachment as an option.
The most suitable system for the evaluations of heat dissipation films etc. By using Xenon lamp, it enables to minimize the damage to the sample. Sample anisotropy can also easily measure by using the original attachment as an option.
Features
- Specific heat measurement with contact and non-contact methods
- Realize an uniform laser pattern (Patented)
- Stabilized lower output laser power supply system(Patented)
- Much better temperature controllability, stability with infrared gold image furnace (TC-1200RH model)
- Available to measure thermal diffusivity at plane direction of thin film with a substrate measurement attachment
Applications
- Research and development of thermoelectric materials
- Research and development of ceramics, metals and organic materials
- Evaluation of thermal diffusivity and thermal conductivity of materials related to FPD
- Research of thermal diffusivity of materials such as semiconductor devices and molded(Seal) materials
Specifications
| Model | TD-1 HTV | TD-1 RTV | TD-1 RTA |
|---|---|---|---|
| Temperature Range | RT to Max. 350℃ | RT | |
| Sample Size | Φ10mm (Round samples, normal direction measurements) Sample thickness 25μm ～ 2mm (For polymid-based samples) ＜Option＞ Round sample holder (Normal direction) Φ12.7, Φ15, Φ20 mm Square sample holder (Normal direction) □10, 12.7 mm In-plane direction holder (In-plane direction) Φ 20 mm |
||
| Number of sample per a measurement | 4 pieces | 1 pieces | |
| Atmosphere | Air, Vacuum, Inert gas | Air | |
The image of measurement of anisotropy
The image of measurement in the normal direction
Applicable materials
- Polymer film
- High brightness LED
- Adhesive
- High thermal conductivity sheet
- Electronic equipments materials
- Double sided tape
- Other polymer materials
- Power device
- Paint
Utility
| Power requirements | AC100V, 15A (PC excluded) |
|---|---|
| Footprint | about 710mm(W) x about 620mm(D) HTV model (Protruding parts excluded) |
| Equipment weight | about 40kg |
Measurement of polyimide film on the market
| Thickness (μm) | 25 | 50 | 75 | 125 |
|---|---|---|---|---|
| Thermal diffusivity (×10-6m22s-1) | 0.14 | 0.20 | 0.21 | 0.22 |
