Print/Download
Options & Consumables
Display
ISG1
アルバック
This single channel vacuum gauge display is compatible with all G-TRAN series and CCM series sensors.
Enables users to view system status at a glance.
Enables users to view system status at a glance.
Features
- Compatible with all G-Tran series, and capacitance manometer CCM series
- Control output signal:3 set- point output
- Operates in DC 24V power input (100V AC to 240V AC optional AC adapter)
- Output signal:Linear 0 to10V
- Serial communication type:RS485 communication is standard
- High visibility LED
- Compatible with DIN standards (compact in size of 48 X 96 mm)
- CE compliant
Applications
- Vacuum systems which require pressure value display
- Systems which require many set points
Specifications
| Model | ISG1 | ||
| Connectable sensor units | 1 unit | ||
| Compatible sensor unit | G-TRAN Series Pirani vacuum gauge SW100, Pirani vacuum gauge SP1, Multi ionization gauge (hot cathode gauge) ST200, Multi ionization gauge (hot cathode gauge) SH200, Cold cathode gauge SC1, Capacitance manometer CCMT-D |
||
| Display | Significand: 2 digit, Exponent: 1 digit digital □.□×10□ | ||
| Scale | Pa | ||
| Range | Depends on each sensor unit's pressure range | ||
| Update time | 200ms | ||
| Accuracy | ±2%±1 digit respect to pressure value from measurement unit (CCM series:±4% digit at below 1/10 of full scale) | ||
| Data output | DC 0 to 10V simulatied Log output, Log, linear output ＊Note: Output differs among each unit | ||
| Update time | 70ms | ||
| Resolution | 1mV | ||
| Accuracy | ±10mV respect to pressure value converted to voltage | ||
| Sampling time | 70ms running average in 5 times | ||
| Control input signal | Open collector input, negative logic | ||
| Filament lighting signal, Atmosphere pressure adjustment etc. | |||
| Set point 1, 2, 3 | |||
| Control output signal | Open collector output, Negative logic [[rating: 30VMAX、50mAWAX、70mW] | ||
| Error signal, Filament lighting signal etc. | |||
| Set point 1, 2, 3 | |||
| Serial communication type | RS-485 | ||
| LED display | ERROR | SET-1 | |
| DEG | SET-2 | ||
| ZERO | SET-3 | ||
| Power voltage | DC24V±1V Ripple, noise less than 1% | ||
| Current consumption | 2W (Display unit only) ＊other connected unit's consumption will be added | ||
| Input/output connector | Sensor connector: D-sub15-socket (M2.6 screw) | ||
| I/O connector: D-sub15-pin (M2.6 screw) | |||
| Power supply connector: PHOENIX: MSTB 2, 5/3-STF, 08 | |||
| Operating temperature range | 10 to 40℃ (50 to 104°F) | ||
| Operating humidity range | 15 to 80% (not condensing) | ||
| Weight | 250g | ||
| Dimension W×D×H | DIN 48mm×70mm×96mm (JIS rack size 50mm×70mm×100mm is also available) | ||
| Accessories | Power supply connector: PHOENIX: MSTB 2, 5/3-STF-5, 08 1pc | ||
| DIN panel fixture: Fixture brackets 2pc | |||
| Instruction manual: Standard paper 1pc | |||
| Option | Sensor connectors: D-sub15-pin (M2.6 screw) 1pc | ||
| I/O connector: D-sub15-socket (M2.6 screw) 1pc | |||
| Applicable standard | CE | ||
