Mechanical Booster Pump

PMB-C Series



By using together with dry vacuum pumps, oil rotary vacuum pumps or water-sealed vacuum pumps, mechanical booster pumps can increase pumping speed in the range between 10kPa to 0.1 Pa, where roughing pump pumping speed drops.


  • These pumps use no oil in the pumping chamber resulting in stable performance even when evacuating water vapor or solvent vapors.


Model PMB-040C PMB-060C
Actual pumping speed *1 50Hz 3800m3/h
Maximum suction pressure 50Hz 8.0 x 102Pa
Ultimate pressure *2 6.7 x 10-1Pa
Allowable drive pressure 1.0 x 10-3Pa
Motor (number of poles) *3 15kW (4P) 18.5kW (4P)
Oil *4 ULVOIL R-7
Oil capacity 8.0L
Cooling water Cooling method Water cooling
Primary side pressure 0.1~0.3MPa
Inlet/outlet differential pressure 0.05MPa
Cooling water volume 10L/min
Cooling water temperature 5 to 30℃
Suction diameter JIS B 2290 Corresponds to VG250 Corresponds to VG300
Exhaust port diameter JIS B 2290 Equivalent to VF150 Equivalent to VF200
External dimensions
L x W x H *5
772 x 1182 x 680mm 772 x 1452 x 680mm
Weight 970kg
(without motor)
(without motor)
Standard backing pump PKS-070 PKS-070 x 2

Note) SI units are used in this specification. The following conversion can be used for non-SI units.
Ultimate pressure:6.7×10-1 Pa = 5×10-3 Torr,
Pressure:0.05/0.1/0.2/0.3 Mpa = ~0.5/0.1/2/3 atmospheres

*1 Measured value at 13 Pa
*2 Measured by pirani vacuum gauge (with standard backing pump and oil).
The value would be 6.7 x 10-2 Pa when measured with a McLeod vacuum gauge.
*3 00 VAC 50/60 Hz; 200 VAC 60 Hz; 3-phase
*4 Pump oil types other than the standard type are available. Contact ULVAC.
*5 W = width, D = depth, H = height

該非判定結果報告書 Download

SDS Download

Accessories and Consumables

Inquiry about this product

This website use cookies to obtain and use access data to understand the convenience and usage of customers. If you agree to use cookies, click "I Accept".
[Privacy Plicy] [Cookie Policy]

I Accept