DOP-40D|DOP Series|Rocking Piston Type Dry Vacuum Pump|Rough&Middle Vacuum Pump|Products|ULVAC SHOWCASE

Rocking Piston Type Dry Vacuum Pump

DOP Series

DOP-40D

アルバック

Standard type / Two-stage exhaust system / Thermal protector built-in / Power supply code

Features

  • Compact size with large displacement.
  • Dry vacuum pump using no oil in the gas contact area.
  • Rich lineup available to suit your application.
  • Safety design with built-in automatic reset type thermal protector.
  • Operation is possible from atmospheric pressure.
  • Continuous operation in all pressure zones is possible./li>
  • Simple structure and easy maintenance.

Applications

  • Vacuum chuck, vacuum tweezers.
  • Absorption and transfer of automatic machines.
  • Vacuum packing printing machines.
  • Tip mounter.
  • Medical equipments.
  • Oxygen generator.

Specification

 
Unit 50Hz 60Hz
Actual pumping speed
L/min 40 44
Ultimate pressure※1
Pa (kPa) 1.2×103 (-100.1)
Motor※2
  Single phase, 100V, 210W, 4P,Capacitor run
Full load current
A 3.2 3.9
Weight
kg 7.0
Inlet,outlet pipe diameter(Female)
mm O.D.Φ9×I.D.Φ5 (Rc 1/4)
Ambient temperature
7~40
External dimensions
mm 160(W)×270(L)×179(H)
※1:The gauge pressure display is shown in () of Ultimate pressure.
※2:Power supply plug and Power supply code are not included.

Corresponding certificate/Voltage

Model Applicable standard CE
Declartion of confirmity

100V

115V

200V

220V

230V
DOP-40D
●:Standard、○:Option、-:Not Applicable

Caution

1. The pump is stopped when the lord is operated, and the pump can’t be operated just after that. In this case, please return the atmospheric pressure the inside of the pump.

2. The pump will not often operate normally if it is used with corrosive gases, organic solvents, liquids, or condensed gases (eg steam). The pump will not often operate normally if it is used with gases containing particles or dust etc.

3. Cup packing that is the sliding material of the pump will be worn out by operating, and microscopic particles result from wear of component. Moreover, wear is promoted because the sliding material is weak in moisture, and the pump life decreases if the vacuum gas is moisture. Please suck neither moisture nor condensed gas (steam etc.).

4. It is a pump only in the room. Please do not set it up in the place, that rain and water splash, and outdoors.

5. When securing the pump to a device etc., be sure to attach anti-vibration rubber. Mounting screw size of anti-vibration rubber is M5 x P0.8. Also, the length of the anti-vibration rubber screw mounted on the pump side should not exceed 10 mm.

Dimension drawing

zu_dop040d.gif

> CAD data download(DXF)

Pumping Speed Curves

curve_dop40d.gif

該非判定結果報告書 Download

SDS Download

Accessories and Consumables

Instruction Manuals and Specifications Download

Applications Download

Technical drawings Download

Technical Data Download

This website use cookies to obtain and use access data to understand the convenience and usage of customers. If you agree to use cookies, click "I Accept".
[Privacy Plicy] [Cookie Policy]

I Accept