Option / Consumable parts|Leak Detector|Products|ULVAC SHOWCASE

Option / Consumable parts

For more information on ULVAC products, purchase, and/or consideration, click here.

Sniffer Unit Series

This unit is used to perform the sniffer method, in which tracer gas is pressurized inside the test chamber and the tracer gas leaking outward is detected.

Sniffer Unit Series

Model:AS9

This unit is required to use "Model:HELIOT 900" in Sniffer method.
AS 9 has a low suction flow rate and can measure with high sensitivity.

Sniffer Unit Series

Model:BS9

This unit is required to use "Model:HELIOT 900"in Sniffer method.
BS9 has a high suction flow rate, which speeds up the measurement time

Sniffer Unit Series

Model:BT9

This unit is required to use "Model:HELIOT 900" in Sniffer method.
BT9 has a high suction flow rate and can be used in a variety of applications because of its hose type.


Option / Consumable parts

Low height cart for 901*

Mobile Cart for 901W1 and 901D2

Option / Consumable parts

Controller storage box

A sturdy lockable box for storing controllers.(Key not included) Attaches to handles of 904 or 901 Low height cart

Option / Consumable parts

Carrying case for HELIOT901*

Dedicated case for convenient storage and transfer of 901W1 and 901D2. Low height cart mounted type can not be stored.

Option / Consumable parts

Oil mist trap(for HELIOT904W2)

Oil mist trap for HELIOT904W2


Option / Consumable parts

Controller cable set 5m, 2m

A two-piece set of controller charging and signal cables. Available in lengths of 2 m (standard included) and 5 m.


Option / Consumable parts

Active Touch Pen

Use this when the controller is unresponsive due to wearing insulated gloves.



Option / Consumable parts

Charger for the controller

AC adapter for charging the controller from power outlet(input: 100 to 240V)




SHOWCASE

Option / Consumable parts

I/O connector set

EXT.I/O and LEAKRATE connectors

Option / Consumable parts

Power supply conversion cable

HELIO 700 series or 300 series power cables can be used with HELIOT 900 series

Option / Consumable parts

I/O connector set : LEAKRATE and EXT.I/O

Convert plugs wired for HELIOT 300 series REC.OUT, EXT.V, ACCESSORY to 900 series EXT.I/O, REAKRATE plugs

Option / Consumable parts

Manual angle type valve

Hand-operated, stainless steel, bellows seal, NW25-NW25

Option / Consumable parts

Helium spray gun

Flow rate adjustment nozzle, hose joint Rc 1/4 (Included conversion attachment: 8.5 phi pipe, FP 1/4)

Option / Consumable parts

Test chamber

Internal dimensions: 96 mm diameter x 30 mm depth, stainless steel, NW25

Option / Consumable parts

Ion source

Applicable models: HELIO 900 series, 710 series, 700 series, 100 series, ZERO

Option / Consumable parts

Bombing tank

Pressurized tanks of helium gas used in the bombing method

Option / Consumable parts

Pirani vacuum gauge sensor head

Applicable models: HELIO 900 series, 710 series, 700 series, 100 series

Option / Consumable parts

Micro-separator

Micro-separator used in sniffer units BS *, BT *

This website use cookies to obtain and use access data to understand the convenience and usage of customers. If you agree to use cookies, click "I Accept".
[Privacy Plicy] [Cookie Policy]

I Accept