Option / Consumable parts
For more information on ULVAC products, purchase, and/or consideration, click here.
Sniffer Unit
This unit is used to perform the sniffer method, in which tracer gas is pressurized inside the test chamber and the tracer gas leaking outward is detected.
Sniffer Unit
Model: AS9
This unit is used with the HELIOT900 for sniffer method(suction method).
The AS9 is a sniffer unit with a low suction volume that enables high-sensitivity measurement.
It is also suitable for leak testing using the pressurized integration method to measure concentrations.
Sniffer Unit
Model: BS9
This unit is used with the HELIOT900 for sniffer method(suction method)
The BS unit is a differential exhaust type sniffer unit with a large suction capacity.
Sniffer Unit
Model: BT9
This unit is used with the HELIOT900 for sniffer method(suction method)
The BT unit is a differential exhaust type sniffer unit with a large suction capacity.
The tip is easy to process, making it suitable for a wide range of applications.
Option / Consumable parts
Low height cart for 901*
This mobile cart is designed exclusively for the HELIOT 901W1 and 901D2.
It is convenient for moving the HELIOT frequently.
Option / Consumable parts
Controller storage box
A sturdy lockable box for storing controllers.(Key not included) Attaches to handles of 904 or 901 Low height cart
Option / Consumable parts
Carrying case for HELIOT901*
Dedicated case for convenient storage and transfer of 901W1 and 901D2. Low height cart mounted type can not be stored.
Option / Consumable parts
Oil mist trap(for HELIOT904W2)
Oil mist trap for HELIOT904W2
Option / Consumable parts
Controller cable set 5m, 2m
A two-piece set of controller charging and signal cables. Available in lengths of 2 m (standard included) and 5 m.
Option / Consumable parts
Active Touch Pen
Use this when the controller is unresponsive due to wearing insulated gloves.
Option / Consumable parts
Charger for the controller
AC adapter for charging the controller from power outlet(input: 100 to 240V)
Option / Consumable parts
I/O connector set
EXT.I/O and LEAKRATE connectors
Option / Consumable parts
Power supply conversion cable
This is a conversion cable for using HELIOT900 with HELIOT300/700 power cables.
Option / Consumable parts
I/O connector set : LEAKRATE and EXT.I/O
Convert plugs wired for HELIOT 300 series REC.OUT, EXT.V, ACCESSORY to 900 series EXT.I/O, REAKRATE plugs
Option / Consumable parts
Manual angle type valve
HELIOT can be operated by closing the valve without using a blind flange when starting up or calibrating sensitivity.
It is a manual, stainless steel, bellows seal, NW25 valve.
Option / Consumable parts
Helium spray gun
Flow rate adjustment nozzle, hose joint Rc 1/4 (Included conversion attachment: 8.5 phi pipe, FP 1/4)
Option / Consumable parts
Test chamber
It can be used for leak testing with the vacuum chamber method and the bombing test method.
It has a small chamber made of SUS with internal dimensions of 96 mm × 30 mm and a NW25 connection.
Option / Consumable parts
Ion source
Applicable models: HELIO 900 series, 710 series, 700 series, 100 series, ZERO
Option / Consumable parts
Bombing tank
Pressurized tanks of helium gas used in the bombing method
Option / Consumable parts
Pirani vacuum gauge sensor head
Applicable models: HELIO 900 series, 710 series, 700 series, 100 series
Option / Consumable parts
G-set option for HELIOT MONO
This is a proposal for customers who do not need a PLC for their equipment and use HELIOT MONO's vacuum vessel method sequence.
・Touch panel (with 5m cable *15m cable option is available)
Controller for HELIOT MONO
・Vacuum gauge set (with 2m cable and piping)
Vacuum gauges set for HELIOT MONO that can read pressure.
・Valve I/O unit
Unit board for controlling valves for the vacuum vessel method. It is built into the main unit.。
・4-piece valve set (each with 3m cable)
4 valves required for the vacuum vessel method test. Connected to and controlled by valve I/O unit.
Option / Consumable parts
Micro-separator
Micro-separator used in sniffer units BS *, BT *