Diaphragm Type Dry Vacuum Pump
DA / DAP / DAT Series 2st Stage Type
DA-41D
アルバック
Features
- A standard type of dry vacuum pump with abundant results and low price.
- Dry vacuum pump using no oil in the gas contact area.
- Rich lineup available to suit your application.
- The two-stage exhaust system has lower pressure (good vacuum) than the one-stage exhaust system.
- Safety design with built-in automatic reset type thermal protector.
- Operation is possible from atmospheric pressure.
- Simple structure and easy maintenance.
- The built-in balance port enables restart from a vacuum condition.
Applications
- Vacuum chucks, wafer and tip handling devices.
- Vacuum tweezers, medical appliances.
- Printing equipment.
- Automatic packing machines.
- Optical appliances.
Specification
|
Unit | 50Hz | 60Hz |
Actual pumping speed
|
L/min | 40 | 46 |
Ultimate pressure※1
|
Pa (kPa) | 3.3×103 (-98.0) | |
Motor
|
Single phase, 100V, 100W, 4P,Capacitor run | ||
Full load current
|
A | 2.5 | 2.7 |
Weight
|
kg | 10.3 | |
Inlet,outlet pipe diameter(Female)
|
mm | O.D.Φ12×I.D.Φ8 (G 1/4) | |
Ambient temperature
|
℃ | 0~40 | |
External dimensions
|
mm | 157(W)×336.5(L)×217(H) | |
External dimensions (Built-in type)
|
mm | 140(W)×288(L)×202(H) |
Corresponding certificate/Voltage
Model | Applicable standard | CE Declartion of confirmity |
1Φ 100V |
1Φ 115V |
1Φ 200V |
1Φ 220V |
DA-41D | - | - | ● | - | ○ | ○ |
DA-41DK※ | - | - | ● | - | ○ | ○ |
※Built-in type only
Caution
1. The pump will not often operate normally if it is used with corrosive gases, organic solvents, liquids, or condensed gases (eg steam).
The pump will not often operate normally if it is used with gases containing particles or dust etc.
2. It is a pump only in the room.
Please do not set it up in the place, that rain and water splash, and outdoors.
Dimension drawing
DA-41D
DA-41DK