Scroll Type Dry Vacuum Pump
SGT Series
SGT-200
アルバック
Vacuum Pump Suction and Exhaust Filter
This filter can trap acidic gas, oil mist effectively by using ion-exchanged resin fiber. Filter can be placed both vacuum and exhaust side and filter can be replaceable.
This filter can trap acidic gas, oil mist effectively by using ion-exchanged resin fiber. Filter can be placed both vacuum and exhaust side and filter can be replaceable.
Features
- Filters usable for vacuum pumps can be used for various types of vacuum equipment.
- Filter can be placed both suction and exhaust side.
- Reaction products and powders discharged from equipment are absorbed and collected by the elements of an ion exchange resin fiber.
- Not only powders in the exhaust gas but acid gas/oil-mist can also be captured efficiently.
- When the vacuum pump and pump oil are kept clean over a long period of time this can help to avoid a vacuum pump malfunction and reduce the number of oil changes.
- KF-clamps, reducers, center rings, etc. are additionally required for attachment (contact us separately.)
Specification
Model
|
SGT-100 | SGT-200 |
Filter system
|
Out・In・Pass | |
Applicable models
|
500L/min or less | |
Pressure range
|
0.1MPa | |
Ambinent temperature
|
7~40℃ | |
Ambinent humidity
|
85%(non condensing) | |
Suction port
|
KF-25 | KF-40 |
Exhaust port
|
KF-25 | KF-40 |
Height
|
154mm | 234mm |
*Since the "SGT-200" uses two filter elements of the same size as the "SGT-100", the capture rate is doubled
When a small amount of powder is mixed in with the suction gas, it is recommended to use the “SGT-100” in order to positively suction powder, use the “SGT-200” |