Model:VLHーSB016CH|Vacuum Angle Valve|Vacuum Valve|Products|ULVAC SHOWCASE

Vacuum Angle Valve Model:VLHーSB016CH

ULVAC TECHNO

For more information on ULVAC products, purchase, and/or consideration, click here.

ULVAC's vacuum valves were developed based on a wealth of technology and experience in the vacuum field.
We offer a variety of products that meet a wide range of needs from atmospheric pressure to ultra-high vacuum.

Specifications

Model VLH-SB
Maximum allowable differential pressure on valve plate
(Positive pressure/counter pressure) MPa
0.10
Maximum allowable differential pressure in opening direction (Positive pressure/counter pressure) MPa 0.10
Plate seal O-ring
Feedthrough Bellows
Actuation Manual
External leak rate*1 Pa・m3/s ≦1.0E-10
Internal leak rate*1 Pa・m3/s ≦1.0E-10
Operating pressure range
(absolute pressure) Pa
Atm. ~ 1.0E-6
Bakeout temperature
(when stopping)*2
Body:150*3, actuation:70
Operating ambient temperature ℃ 5~70
Fluid temperature ℃ 5~70
Heating & cooling speed ℃/h ≦30
Operating ambient Non-corrosive
Fluid Non-corrosive
Compressed air to cylinder MPaG
Warranted operation cycle*4 10,000
Orientation No limitation
Position indicator
Material of major parts (Vacuum side) Stainless steel 304
Material of major parts (Atmosphere side) Stainless steel 304, Aluminum-6061 (anodized aluminum)
Bellows material Stainless steel 316L
Seal material (Vacuum side) FKM
Grease (Vacuum side) Any grease is not used
Attachment for lifting None*5
RoHS Complied

*1 Leak rate does not include permeation in O-ring. External leak during opening and closing is not regulated in the case of O-ring shaft seal feedthrough.
*2 Do not open and close during bakeout.
*3  Regarding to VLP-MB abd VLH-MB, maximum body bakeout temperature in opening position: 200?C (392F) and in closing position: 150?C (302F).
*4 See instruction manual for detail.
*5  Lifting attachment is included for VLP-SA350JH (Eyebolt M12 x 2pcs).

Inquiry about this product

1. I have read and agree to the Privacy Policy

Agree 

2. Enter the product name or model number.*

3. Select the status of the inquiry product.*

4. Request for *

5.  If you selected "I would like to consult about a problem or malfunction" in step 4, please enter the product number or serial number.

6. Comment *

​​​​​​​

Contact Information

Remember Me
​​​​​​​
​​​​​​​

The ULVAC email distribution office sends information about vacuum, such as product information, product maintenance, and web seminars. Click "Allow" if you wish.

Email delivery from us

This website use cookies to obtain and use access data to understand the convenience and usage of customers. If you agree to use cookies, click "I Accept".
[Privacy Plicy] [Cookie Policy]

I Accept